5 Métodos de partida do motor elétrico - qual se encaixa melhor no seu projeto?

Choosing the right electric motor starting method isn’t just a technical detail—it affects your machine’s lifetime, your electricity bill, and even your stress level during peak season.

The 5 main motor starting methods are: DOL, Auto-transformer, Star-Delta, Soft Starter, and VFD. Each suits different load sizes and control needs. For example, DOL is great for small machines, while VFD is best when you need speed control. Knowing when to use each method can save you money and protect your equipment from damage.

Let’s break them down one by one, in plain language—so you’ll never be confused again.

What is DOL Start, and when is it still a good idea?

This method is as straightforward as it sounds—just switch it on, and boom, the motor runs at full speed.

DOL (Direct-On-Line) starting is best for motors up to 3kW with light loads. It's the simplest and cheapest method but comes with a punch—very high starting current. That can strain your power grid and shorten motor life. Use it only if your load is light and your grid is stable.

Why it’s still used

Sometimes, simple wins. I’ve seen many buyers—especially in places with stable electricity and light machinery like fans or small compressors—stick with DOL. But I always remind them to install overload protection devices. A $30 relay can save you from a $300 headache later.

Prós & Contras

When should you go with Auto-transformer Start?

If you’re running a medium or large motor and starting it often, this method might be for you.

Auto-transformer start reduces the starting current by using a transformer, which protects the power grid and extends motor life. It’s often found in older systems and industrial setups with limited grid capacity.

What I’ve seen in the field

One client from Nigeria was using a 15kW motor to run a grain mill, but kept tripping the local transformer. We swapped in an auto-transformer starter, and the problem disappeared overnight. It’s not fancy, but it gets the job done.

Prós & Contras

Star-Delta Start: Is it worth it?

You’ve probably heard of this one—it’s popular in pump and fan systems.

Star-Delta starting reduces the initial voltage by wiring the motor in “star” mode first, then switching to “delta” once it’s up to speed. It lowers starting current, but also reduces torque, which makes it a poor fit for heavy loads.

A word of warning

A buyer in Thailand once called me, frustrated. His motor wouldn’t start under load. Turned out he had a heavy mixer and used star-delta—wrong match. We switched to a soft starter, and everything ran smoothly.

Prós & Contras

What makes Soft Starters so popular now?

When you want a smooth, gentle start and stop, this is the way to go.

Soft starters gradually ramp up the voltage, reducing mechanical stress and electrical shock to the system. They’re great for conveyors, mixers, and applications with sensitive equipment. The cost is higher, but the savings on wear and tear can be huge.

Why I recommend them

For mid-sized projects, I always suggest soft starters. One client in Ecuador used it for a conveyor system and said, “We finally stopped replacing belts every month.” That’s the kind of result that makes me smile.

Prós & Contras

Is VFD Start worth the higher cost?

If you need speed control, remote monitoring, or automation—you need a VFD.

VFDs (Variable Frequency Drives) allow full control over motor speed and torque. They’re ideal for smart systems, energy savings, and modern factory setups. While the initial investment is high, the long-term benefits in control and energy efficiency are hard to beat.

From my own experience

A food equipment manufacturer in Greece was struggling to get consistent speeds with their filling machines. We introduced a VFD system, and not only did it fix the issue—they started saving on electricity bills too. Win-win.

Prós & Contras

---

Conclusão

There’s no “one size fits all” in motor starting. What works for a fan in Chile may not work for a conveyor in South Africa. But once you know the strengths of each method, choosing becomes much easier.